Anti-Condensation Insulation Material Rubber and Plastic Insulation Board

• Material: Rubber
• Refractoriness: 80ºC
• Diameter: No
• Apparent Density: 35~38kg/m³
• Surface Treatment: No
• Usage: PVC Pipe Insulation
• Color: Black
• Transport Package: Plastic Bag
• Specification: 8000mm*1500mm*10mm-30mm
• Trademark: Fanyang
• Origin: Shaanxi, China
• Production Capacity: 20000 Tons/Year

Product Description

Product Description

We produce RUbber-plsatic Foamed Heat Preservation Products(PVC/NBR)by introducing newest technology and craft and automatic processing line.The major materials we use are NBR/PVC,which are undergone ban bury,vulcanization and foam,Therefore,the main characteristics are:Low density,close bubble structure,low thermal conductivity,
    Water vapor transmissibility extremely low,low water -absorptive ability,Fire-proof performance well,superior anti-agde performance,good flexibility,easy to install.
    This product is suitable for a wide temperature range,from -40ºC is to 105ºC ,also has good anti-adge performance and durability.Its fire +proof capacity achieves the standard of national B1 level.

Product performance index

1	surface density		Kg/m³	≤95	46
2	oxygen index		%	≥32	34.4
3	Smoke density		/	≤75	28
4	thermal conductivity	Average temperature::-20ºC	W/(m·K)	≤0.034	0.030
		Average temperature::0ºC	W/(m·K)	≤0.036	0.033
		Average temperature::40ºC	W/(m·K)	≤0.041	0.038
5	Wet resistance factor	Moisture permeability	G/(m·s·Pa)	≤1.3*10^-10	8.7*10^-11
		Moisture permeability coefficient	/	≥1.5*10^2	2.3*10^3
6	Vacuum water absorption		%	≤10	3
7	Compression springback rate Compression ratio 50% Compression time 72 h		%	≥70	89
8	ageing resistance ,150h		/	Slight wrinkle, no crack, no pinhole, no deformation	pass through

There are two types of rubber and plastic insulation materials, one is rubber and plastic insulation board, and the other is rubber and plastic insulation pipe. Rubber and plastic insulation pipe The diameter is divided into ⊘25 ⊘32 ⊘40 ⊘50 ⊘60 ⊘76 ⊘89 ⊘108, all in (mm) unit, the width of the rubber and plastic plate is 1500mm*length 8000mm, if there is any abnormal shape, it can be customized according to the requirements of the drawing. The fire protection level is divided into B1 and B2. It is recommended to take B1 level. The thickness of the conventional insulation layer is 15mm 20mm 25mm 30mm 35mm 40mm. The thickness of 35mm and 40mm requires a certain amount of engineering. It is recommended to be around 2000m-5000m.
Product quality: everything is based on samples.
Warranty period: If it is not a particularly harsh environment, there is no problem in using it for ten years
It is forbidden to expose to wind, sun, rain, and the environment containing corrosive gas will reduce the service life.
Transportation: the port designated by Party A (recommended Tianjin Port or Qingdao Port)